SkyView Technical Support FAQ

From DynonDocs
Revision as of 15:01, 2 December 2011 by Admin (talk | contribs) (Created page with "''' Thanks for reading - work in progress.''' <br> <br> == I just got my new SkyView system. I figured how to hook up the power and ground wires, but when I connect up the SV-ADA...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Thanks for reading - work in progress.

I just got my new SkyView system. I figured how to hook up the power and ground wires, but when I connect up the SV-ADAHRS-200 with the provided cable, all I see is 3 Red X's. Help!

A SkyView Display, as shipped from the factory, is set to display MAP (30%), PFD (30%), and EMS (20%).

To do a SkyView Network Configuration, push Buttons 7+9 to access the SETUP Menu, then SYSTEM SETUP > NETWORK SETUP > CONFIGURE > DETECT (button).

  • The EMS screen will disappear (SV-EMS-220 not detected on SkyView Network)
  • The MAP will continue to display the red X until a GPS is connected to the SkyView display.
  • The Primary Flight Display (PFD) screen will display.