Difference between revisions of "SkyView Technical Support FAQ"

From DynonDocs
Jump to: navigation, search
(Initial questions)
m
Line 2: Line 2:
 
<br>
 
<br>
 
<br>
 
<br>
== I just got my new SkyView system. I figured how to hook up the power and ground wires, but when I connect up the SV-ADAHRS-200 with the provided cable, all I see is 3 Red X's. Help! ==
+
== I just got my new SkyView system. I figured how to hook up the power and ground wires, but when I connect up the SV-ADAHRS-200 with the provided cable, all I see is three big Red X's. Help! ==
  
 
A SkyView Display, as shipped from the factory, is set to display MAP (30%), PFD (30%), and EMS (20%).
 
A SkyView Display, as shipped from the factory, is set to display MAP (30%), PFD (30%), and EMS (20%).
  
To do a SkyView Network Configuration, push Buttons 7+9 to access the SETUP Menu, then SYSTEM SETUP > NETWORK SETUP > CONFIGURE > DETECT (button).
+
To do a SkyView Network Configuration (recognizes the devices connected to the SkyView display), push Buttons 7+9 to access the SETUP Menu, then SYSTEM SETUP > NETWORK SETUP > CONFIGURE > DETECT (button).
 
<ul>
 
<ul>
 
<li> The EMS screen will disappear (SV-EMS-220 not detected on SkyView Network)
 
<li> The EMS screen will disappear (SV-EMS-220 not detected on SkyView Network)
Line 17: Line 17:
 
== Tech Support FAQ #2 ==
 
== Tech Support FAQ #2 ==
 
Answer #2
 
Answer #2
 
  
 
== Tech Support FAQ #3 ==
 
== Tech Support FAQ #3 ==
 
Answer #3
 
Answer #3
 
  
 
== Tech Support FAQ #4 ==
 
== Tech Support FAQ #4 ==
 
Answer #4
 
Answer #4
 
  
 
== Tech Support FAQ #5 ==
 
== Tech Support FAQ #5 ==
 
Answer #5
 
Answer #5

Revision as of 15:06, 2 December 2011

Thanks for reading - work in progress.

I just got my new SkyView system. I figured how to hook up the power and ground wires, but when I connect up the SV-ADAHRS-200 with the provided cable, all I see is three big Red X's. Help!

A SkyView Display, as shipped from the factory, is set to display MAP (30%), PFD (30%), and EMS (20%).

To do a SkyView Network Configuration (recognizes the devices connected to the SkyView display), push Buttons 7+9 to access the SETUP Menu, then SYSTEM SETUP > NETWORK SETUP > CONFIGURE > DETECT (button).

  • The EMS screen will disappear (SV-EMS-220 not detected on SkyView Network)
  • The MAP will continue to display the red X until a GPS is connected to the SkyView display.
  • The Primary Flight Display (PFD) screen will display.

The SkyView Network Configuration procedure must be performed any time the network configuration is changed - devices added, or removed.

Tech Support FAQ #2

Answer #2

Tech Support FAQ #3

Answer #3

Tech Support FAQ #4

Answer #4

Tech Support FAQ #5

Answer #5