Difference between revisions of "SkyView Technical Support FAQ"

From DynonDocs
Jump to: navigation, search
(Created page with "''' Thanks for reading - work in progress.''' <br> <br> == I just got my new SkyView system. I figured how to hook up the power and ground wires, but when I connect up the SV-ADA...")
 
(Initial questions)
Line 12: Line 12:
 
<li> The Primary Flight Display (PFD) screen will display.
 
<li> The Primary Flight Display (PFD) screen will display.
 
</ul>
 
</ul>
 +
The SkyView Network Configuration procedure must be performed any time the network configuration is changed - devices added, or removed.
 +
<br>
 +
 +
== Tech Support FAQ #2 ==
 +
Answer #2
 +
 +
 +
== Tech Support FAQ #3 ==
 +
Answer #3
 +
 +
 +
== Tech Support FAQ #4 ==
 +
Answer #4
 +
 +
 +
== Tech Support FAQ #5 ==
 +
Answer #5

Revision as of 15:05, 2 December 2011

Thanks for reading - work in progress.

I just got my new SkyView system. I figured how to hook up the power and ground wires, but when I connect up the SV-ADAHRS-200 with the provided cable, all I see is 3 Red X's. Help!

A SkyView Display, as shipped from the factory, is set to display MAP (30%), PFD (30%), and EMS (20%).

To do a SkyView Network Configuration, push Buttons 7+9 to access the SETUP Menu, then SYSTEM SETUP > NETWORK SETUP > CONFIGURE > DETECT (button).

  • The EMS screen will disappear (SV-EMS-220 not detected on SkyView Network)
  • The MAP will continue to display the red X until a GPS is connected to the SkyView display.
  • The Primary Flight Display (PFD) screen will display.

The SkyView Network Configuration procedure must be performed any time the network configuration is changed - devices added, or removed.

Tech Support FAQ #2

Answer #2


Tech Support FAQ #3

Answer #3


Tech Support FAQ #4

Answer #4


Tech Support FAQ #5

Answer #5