Difference between revisions of "HS34 Basic Operation Guide Text"

From DynonDocs
Jump to: navigation, search
(Proposed Text)
Line 1: Line 1:
 
== Proposed Text ==
 
== Proposed Text ==
  
*VALUE knob
+
*VALUE knob — only changes EFIS settings
 +
**When no menu is shown, turning it adjusts the barometer.
 
**When no menu is shown, pushing and holding it sets the barometer to 29.92 inHg.
 
**When no menu is shown, pushing and holding it sets the barometer to 29.92 inHg.
**When no menu is shown, turning it adjusts the barometer.
+
**When in any menu which adjusts a numerical value, turning it adjusts that value.
**When in any menu which adjusts a numerical value, turning it value knob adjusts that value.
 
 
**When in any menu which adjusts a numerical value, pushing it performs the same function as BACK.
 
**When in any menu which adjusts a numerical value, pushing it performs the same function as BACK.
*The light sensor can be configured in the EFIS > DIM menu to auto-dim all screens in a DSAB system
+
*The light sensor can be configured in the EFIS > DIM menu to auto-dim all screens in a DSAB system.
 
*NAV/GPS status lights indicate currently active nav source.
 
*NAV/GPS status lights indicate currently active nav source.
 
*NAV SRC cycles through possible navigation sources in the order configured by the pilot.
 
*NAV SRC cycles through possible navigation sources in the order configured by the pilot.
 
*BRG SRC is used to configure bearing pointers on the HSI page. Exact behavior is dependent upon installed sources.
 
*BRG SRC is used to configure bearing pointers on the HSI page. Exact behavior is dependent upon installed sources.
 
*HEADING knob
 
*HEADING knob
**Rotating it will adjust the heading bug and will display the bug if it is not displayed.
+
**Rotating it adjusts the heading bug and will display the bug if it is not displayed.
**Tapping it will sync heading bug to current heading.
+
**Tapping it syncs heading bug to the current heading.
**Holding it will toggle heading bug.
+
**Pushing and holding it toggles the heading bug display.
 
*COURSE knob
 
*COURSE knob
**Rotating it will adjust the course if allowed by the nav source. [gps sends the course, nav radio user is tuning course]
+
**Rotating it adjusts the course if allowed by the nav source.  
**Tapping it will sync course to current heading if allowed by the nav source.
+
**Tapping it syncs course to the current heading if allowed by the nav source.
**Holding it will sync course to BTS
+
**Pushing and holding it syncs the course to the Bearing to Active, when available.
 
+
*Please see your EFIS-based product Installation Guide appendix for detailed installation instructions. See your EFIS-based product Pilot's User Guide for more usage instructions. The latest versions are available at our web site.
== Potential Additions ==
 
Information about the "EFIS Provider" being the only unit on the bus providing EFIS info, the only one to be controlled by HS34, the one that needs to be on for DSAB to work.
 
 
 
 
 
== Questions: ==
 
*does value knob affect EMS values?
 
**no, never.
 

Revision as of 12:52, 21 August 2007

Proposed Text

  • VALUE knob — only changes EFIS settings
    • When no menu is shown, turning it adjusts the barometer.
    • When no menu is shown, pushing and holding it sets the barometer to 29.92 inHg.
    • When in any menu which adjusts a numerical value, turning it adjusts that value.
    • When in any menu which adjusts a numerical value, pushing it performs the same function as BACK.
  • The light sensor can be configured in the EFIS > DIM menu to auto-dim all screens in a DSAB system.
  • NAV/GPS status lights indicate currently active nav source.
  • NAV SRC cycles through possible navigation sources in the order configured by the pilot.
  • BRG SRC is used to configure bearing pointers on the HSI page. Exact behavior is dependent upon installed sources.
  • HEADING knob
    • Rotating it adjusts the heading bug and will display the bug if it is not displayed.
    • Tapping it syncs heading bug to the current heading.
    • Pushing and holding it toggles the heading bug display.
  • COURSE knob
    • Rotating it adjusts the course if allowed by the nav source.
    • Tapping it syncs course to the current heading if allowed by the nav source.
    • Pushing and holding it syncs the course to the Bearing to Active, when available.
  • Please see your EFIS-based product Installation Guide appendix for detailed installation instructions. See your EFIS-based product Pilot's User Guide for more usage instructions. The latest versions are available at our web site.