Difference between revisions of "HS34 Basic Operation Guide Text"

From DynonDocs
Jump to: navigation, search
(Proposed Text)
Line 1: Line 1:
 
 
== Proposed Text ==
 
== Proposed Text ==
  
 +
*Light sensor
 +
**Can be configured in EFIS DIM menu to auto-dim all screens in DSAB system
 
*when no menu shown
 
*when no menu shown
 
**pushing and holding value knob sets baro to 29.92
 
**pushing and holding value knob sets baro to 29.92
Line 8: Line 9:
 
**turning the value knob will adjust that value (pending verification)
 
**turning the value knob will adjust that value (pending verification)
 
**pushing the value knob will perform the same function as BACK
 
**pushing the value knob will perform the same function as BACK
 +
*NAV/GPS indicators
 +
**indicate currently active nav source
 
*NAV SRC rotates through possible navigation sources in the order configured by the user
 
*NAV SRC rotates through possible navigation sources in the order configured by the user
 
*BRG SRC is used to configure bearing pointers on the HSI page. Exact behavior is dependant upon installed sources.
 
*BRG SRC is used to configure bearing pointers on the HSI page. Exact behavior is dependant upon installed sources.
Line 18: Line 21:
 
**tapping will sync course to current heading (again, if allowed)
 
**tapping will sync course to current heading (again, if allowed)
 
**holding will sync course to BTS
 
**holding will sync course to BTS
*Light sensor
 
**Can be configured in EFIS DIM menu to auto-dim all screens in DSAB system
 
*NAV/GPS indicators
 
**indicate currently active nav source
 
 
  
 
== Potential Additions ==
 
== Potential Additions ==

Revision as of 07:04, 20 August 2007

Proposed Text

  • Light sensor
    • Can be configured in EFIS DIM menu to auto-dim all screens in DSAB system
  • when no menu shown
    • pushing and holding value knob sets baro to 29.92
    • turning the value knob adjusts the barometer
  • when in any menu which adjusts a numerical value
    • turning the value knob will adjust that value (pending verification)
    • pushing the value knob will perform the same function as BACK
  • NAV/GPS indicators
    • indicate currently active nav source
  • NAV SRC rotates through possible navigation sources in the order configured by the user
  • BRG SRC is used to configure bearing pointers on the HSI page. Exact behavior is dependant upon installed sources.
  • HEADING knob
    • rotating will adjust the heading bug and will display the bug if it is not displayed
    • tapping will sync heading bug to current heading
    • holding will toggle heading bug
  • COURSE knob
    • rotating will adjust the course if allowed by the nav source (gps sends the course, nav radio user is tuning course)
    • tapping will sync course to current heading (again, if allowed)
    • holding will sync course to BTS

Potential Additions

Information about the "EFIS Provider" being the only unit on the bus providing EFIS info, the only one to be controlled by HS34, the one that needs to be on for DSAB to work.


Questions:

  • does value knob affect EMS values?
    • no, never.