Difference between revisions of "3rd Party Accessories not supplied by Dynon"

From DynonDocs
Jump to: navigation, search
(Added "TNC to BNC Adapter")
(Added "D1 External GPS Extension Cable")
Line 58: Line 58:
  
 
[http://www.digikey.com/scripts/dksearch/dksus.dll?vendor=0&keywords=ACX1378-ND TNC to BNC Adapter][[Image:242149_sml.jpg]]
 
[http://www.digikey.com/scripts/dksearch/dksus.dll?vendor=0&keywords=ACX1378-ND TNC to BNC Adapter][[Image:242149_sml.jpg]]
 +
 +
== D1 External GPS Extension Cable ==
 +
 +
The Dynon D1's External GPS can be extended with the proper extension cable.
 +
 +
[http://www.amazon.com/gp/product/B008DWGLLO/ref=oh_details_o06_s01_i00?ie=UTF8&psc=1 4 Position Headset Extension Cable][[Image:31HFisStxAL._SX385_.jpg‎ ]]

Revision as of 15:48, 27 August 2013

Dynon Avionics makes no representations or endorsements of the products found on this page

Ethernet Switch

For customers that install 3 SkyView displays

Contemporary Controls BAS Switch; Available from:


Multi-channel audio mixers

For customers that need to mix in different audio alarms / music / etc to a single input.

Pitot Tube Mounting Bracket Kit

Pitot Tube Mounting Bracket Kits Paintable.jpg

Angle of Attack (AOA) / Pitot / Static Pneumatic Lines

SafeAir1 AOA-Pitot-Static Air Kits PSA Kit SkyView 08.jpg

Remote Angle of Attack Display

VX-Aviation Remote LED AOA Display ADS-horizontal.jpg

Remote Magnetometer (Compass) Mount

SafeAir1 Remote Compass Mount for EDC-D10A RCmount 05.jpg

RPM Signal Voltage Adapter

Useful for adapting a "ECU" (engine control unit) low-voltage (typically, 5V) tachometer signal to a level that can be detected by a Dynon EMS-D10, EMS-D120, or FlightDEK-D180, which require a tachometer signal > 10V.

Baker Electronix TSD/ATSD (Tachometer Adapter) DSC00056r.jpg

Tachometer Generator

Useful for when tapping the P-Lead or other existing signals on an engine isn't applicable. This unit has been verified to work by several customers.

Van's Aircraft P/N IE VTACHGEN 2

24V to 12V DC-DC Converter 10A

Dynon heated pitot tube controller requires 10-15V power input. This unit converts 24V to 12V with minimal power loss.

This unit is only needed for 24V aircraft.

24-12V DC-DC Converter 10AJaycar mp3061.jpg

TNC to BNC Adapter

Dynon's SV-XPNDR-261 and -262 transponders have a TNC connector. But, BNC connectors are more common for preassembled transponder antenna / coaxial cable assemblies than the TNC connector, so here is an adapter that converts TNC to BNC.

TNC to BNC Adapter242149 sml.jpg

D1 External GPS Extension Cable

The Dynon D1's External GPS can be extended with the proper extension cable.

4 Position Headset Extension Cable31HFisStxAL. SX385 .jpg