Difference between revisions of "3rd Party Accessories not supplied by Dynon"

From DynonDocs
Jump to: navigation, search
(added tach generator)
Line 1: Line 1:
 
''Dynon Avionics makes no representations or endorsements of the products found on this page''
 
''Dynon Avionics makes no representations or endorsements of the products found on this page''
 +
 +
== Ethernet Switch ==
 +
For customers that install 3 SkyView displays
 +
 +
Contemporary Controls BAS Switch; Available from:
 +
* http://www.ccontrols.com/store/unmanaged.shtml#basswitch
 +
* http://www.steinair.net/storedetail.cfm?productid=531
 +
 +
  
 
== Multi-channel audio mixers ==
 
== Multi-channel audio mixers ==

Revision as of 10:26, 23 May 2013

Dynon Avionics makes no representations or endorsements of the products found on this page

Ethernet Switch

For customers that install 3 SkyView displays

Contemporary Controls BAS Switch; Available from:


Multi-channel audio mixers

For customers that need to mix in different audio alarms / music / etc to a single input.

Pitot Tube Mounting Bracket Kit

Pitot Tube Mounting Bracket Kits Paintable.jpg

Angle of Attack (AOA) / Pitot / Static Pneumatic Lines

SafeAir1 AOA-Pitot-Static Air Kits PSA Kit SkyView 08.jpg

Remote Angle of Attack Display

VX-Aviation Remote LED AOA Display ADS-horizontal.jpg

Remote Magnetometer (Compass) Mount

SafeAir1 Remote Compass Mount for EDC-D10A RCmount 05.jpg

RPM Signal Voltage Adapter

Useful for adapting a "ECU" (engine control unit) low-voltage (typically, 5V) tachometer signal to a level that can be detected by a Dynon EMS-D10, EMS-D120, or FlightDEK-D180, which require a tachometer signal > 10V.

Baker Electronix TSD/ATSD (Tachometer Adapter) DSC00056r.jpg

Tachometer Generator

Useful for when tapping the P-Lead or other existing signals on an engine isn't applicable. This unit has been verified to work by several customers.

Van's Aircraft P/N IE VTACHGEN 2

24V to 12V DC-DC Converter 10A

Dynon heated pitot tube controller requires 10-15V power input. This unit converts 24V to 12V with minimal power loss.

This unit is only needed for 24V aircraft.

24 -12V DC-DC Converter 10AJaycar mp3061.jpg