3rd Party Accessories not supplied by Dynon

From DynonDocs
Revision as of 09:26, 23 May 2013 by Dynon mjs (talk | contribs)
Jump to: navigation, search

Dynon Avionics makes no representations or endorsements of the products found on this page

Ethernet Switch

For customers that install 3 SkyView displays

Contemporary Controls BAS Switch; Available from:

Multi-channel audio mixers

For customers that need to mix in different audio alarms / music / etc to a single input.

Pitot Tube Mounting Bracket Kit

Pitot Tube Mounting Bracket Kits Paintable.jpg

Angle of Attack (AOA) / Pitot / Static Pneumatic Lines

SafeAir1 AOA-Pitot-Static Air Kits PSA Kit SkyView 08.jpg

Remote Angle of Attack Display

VX-Aviation Remote LED AOA Display ADS-horizontal.jpg

Remote Magnetometer (Compass) Mount

SafeAir1 Remote Compass Mount for EDC-D10A RCmount 05.jpg

RPM Signal Voltage Adapter

Useful for adapting a "ECU" (engine control unit) low-voltage (typically, 5V) tachometer signal to a level that can be detected by a Dynon EMS-D10, EMS-D120, or FlightDEK-D180, which require a tachometer signal > 10V.

Baker Electronix TSD/ATSD (Tachometer Adapter) DSC00056r.jpg

Tachometer Generator

Useful for when tapping the P-Lead or other existing signals on an engine isn't applicable. This unit has been verified to work by several customers.

Van's Aircraft P/N IE VTACHGEN 2

24V to 12V DC-DC Converter 10A

Dynon heated pitot tube controller requires 10-15V power input. This unit converts 24V to 12V with minimal power loss.

This unit is only needed for 24V aircraft.

24 -12V DC-DC Converter 10AJaycar mp3061.jpg