Difference between revisions of "3rd Party Accessories not supplied by Dynon"

From DynonDocs
Jump to: navigation, search
m (24V to 12V DC-DC Converter 10A)
(added tach generator)
Line 29: Line 29:
  
 
[http://www.bakerelectronix.com/products_tsd/ Baker Electronix TSD/ATSD (Tachometer Adapter)] [[Image:DSC00056r.jpg]]
 
[http://www.bakerelectronix.com/products_tsd/ Baker Electronix TSD/ATSD (Tachometer Adapter)] [[Image:DSC00056r.jpg]]
 +
 +
== Tachometer Generator ==
 +
 +
Useful for when tapping the P-Lead or other existing signals on an engine isn't applicable. [http://www.vansairforce.com/community/archive/index.php?t-57120.html This unit has been verified to work by several customers.]
 +
 +
[http://vansaircraft.com/cgi-bin/store.cgi?ident=1360918969-236-663&browse=ei&product=vans-tach Van's Aircraft P/N IE VTACHGEN 2]
  
 
== 24V to 12V DC-DC Converter 10A ==
 
== 24V to 12V DC-DC Converter 10A ==

Revision as of 13:00, 18 February 2013

Dynon Avionics makes no representations or endorsements of the products found on this page

Multi-channel audio mixers

For customers that need to mix in different audio alarms / music / etc to a single input.

Pitot Tube Mounting Bracket Kit

Pitot Tube Mounting Bracket Kits Paintable.jpg

Angle of Attack (AOA) / Pitot / Static Pneumatic Lines

SafeAir1 AOA-Pitot-Static Air Kits PSA Kit SkyView 08.jpg

Remote Angle of Attack Display

VX-Aviation Remote LED AOA Display ADS-horizontal.jpg

Remote Magnetometer (Compass) Mount

SafeAir1 Remote Compass Mount for EDC-D10A RCmount 05.jpg

RPM Signal Voltage Adapter

Useful for adapting a "ECU" (engine control unit) low-voltage (typically, 5V) tachometer signal to a level that can be detected by a Dynon EMS-D10, EMS-D120, or FlightDEK-D180, which require a tachometer signal > 10V.

Baker Electronix TSD/ATSD (Tachometer Adapter) DSC00056r.jpg

Tachometer Generator

Useful for when tapping the P-Lead or other existing signals on an engine isn't applicable. This unit has been verified to work by several customers.

Van's Aircraft P/N IE VTACHGEN 2

24V to 12V DC-DC Converter 10A

Dynon heated pitot tube controller requires 10-15V power input. This unit converts 24V to 12V with minimal power loss.

This unit is only needed for 24V aircraft.

24 -12V DC-DC Converter 10AJaycar mp3061.jpg