Difference between revisions of "3rd Party Accessories not supplied by Dynon"

From DynonDocs
Jump to: navigation, search
(Added Pitot Tube Mounting Bracket Kit, Angle of Attack (AOA) / Pitot / Static Pneumatic Lines, and RPM Signal Voltage Adapter)
Line 29: Line 29:
  
 
[http://www.bakerelectronix.com/products_tsd/ Baker Electronix TSD/ATSD (Tachometer Adapter)] [[Image:DSC00056r.jpg]]
 
[http://www.bakerelectronix.com/products_tsd/ Baker Electronix TSD/ATSD (Tachometer Adapter)] [[Image:DSC00056r.jpg]]
 +
 +
== 24V to 12V DC-DC Converter 10A/For 24V Aircraft ==
 +
 +
Dynon heated pitot tube controller require a 10V to 15V power. This converter is only needed for 24V aircraft.
 +
 +
[http://www.jaycar.com.au/productView.asp?ID=MP3061&CATID=83&form=CAT2&SUBCAT]

Revision as of 09:19, 8 November 2012

Dynon Avionics makes no representations or endorsements of the products found on this page

Multi-channel audio mixers

For customers that need to mix in different audio alarms / music / etc to a single input.

Pitot Tube Mounting Bracket Kit

Pitot Tube Mounting Bracket Kits Paintable.jpg

Angle of Attack (AOA) / Pitot / Static Pneumatic Lines

SafeAir1 AOA-Pitot-Static Air Kits PSA Kit SkyView 08.jpg

Remote Angle of Attack Display

VX-Aviation Remote LED AOA Display ADS-horizontal.jpg

Remote Magnetometer (Compass) Mount

SafeAir1 Remote Compass Mount for EDC-D10A RCmount 05.jpg

RPM Signal Voltage Adapter

Useful for adapting a "ECU" (engine control unit) low-voltage (typically, 5V) tachometer signal to a level that can be detected by a Dynon EMS-D10, EMS-D120, or FlightDEK-D180, which require a tachometer signal > 10V.

Baker Electronix TSD/ATSD (Tachometer Adapter) DSC00056r.jpg

24V to 12V DC-DC Converter 10A/For 24V Aircraft

Dynon heated pitot tube controller require a 10V to 15V power. This converter is only needed for 24V aircraft.

[1]